Username or Email Address
£1,800.00 Incl VAT £1,500.00 Excl VAT
TT21/TT22 transponders are highly compact and light weight, remote mount transponders which can be fitted in the panel as either a compact mount or in a conventional 57mm / 2 1⁄4” round mount hole (brackets are included in the installation kit for this purpose).
STOCK WITH SUPPLIER - Contact us for a lead time
— OR —
Chosen by pilots around the world Trig’s compact transponders are the best choice for good reason.
Fitting in the tightest panel space the innovative design saves weight and space. Trig is ‘better by design,’with Mode S technology that makes you visible to commercial, military and GA traffic, as a result transiting busy airspace becomes more predictable and stress free. Trig transponders are future proof too – the growing use of ADS-B further enhances your visibility and flight safety. Unlike other brands Trig transponders meet the very latest certification standard for ADS-B, FAA TSO-C166b.
Designed to be easier to use, with a clear bright display the controller even comes with a built in altitude encoder! Join other pilots who have made Trig their compact transponder of choice – you’ll be in great company.
Trig’s compact transponder is in two parts with a compact control head; this includes an inbuilt altitude encoder – saving further space and expense. A separate hardware box can be installed anywhere in the airframe. The mounted control head is only 54mm (2 3/25”) deep and can be fitted in panel using a 57mm (2 ¼”) round hole or smaller compact mount – the unit ships with the necessary fittings for both install options. Our compact transponders are highly efficient, whilst used in a wide range of GA types they are ideally suited for use in gliders and balloons, via an auxiliary battery.
Trig’s compact transponders are easy to operate and have a crisp, bright display that’s easy to read in all lighting conditions and is equipped with manual dimming. The transponder control head is splash proof too, so it’s ideal for open cockpit and seaplane operations.
Trig’s TT21 has a 130 watts nominal power output, making it a class 2 transponder that meets international standards for 1090ES ADS-B Out (TSO C166b). The TT21 is ideal for use in flight where a light weight Mode S solution is required and is suitable for both IFR and VFR use.
ADS-B enhances safety and visibility – your investment in a TT22 transponder is future proof. Trig has a matching certified GPS position source that is highly affordable called the TN72. This is ideal for ADS-B voluntary equipage and the TN72 can even be used to meet the 2020 mandate by light-sport, experimental and homebuilt types in the U.S.
Our TN70 GPS position source is suitable for certified Part 23 aircraft that need a TSO-C145 position source, for operations in 2020 rule ADS-B airspace using a TT22 transponder.
Customers in the U.S. should be aware that FAA, Federal Aviation Regulations (FAR) 91.227 requires that a compliant ADS-B Out solution uses a Class 1 transponder. The TT22 is a Class 1 device and meets this requirement. The TT21 is a Class 2 device and does not meet this regulation.
Transponder Class 2 Mode S level 2els ADS-B Class B0
ETSO C88A, C112C, C166A
TSO C88b, C112c, C166b, approved for IFR and VFR flight
ED-73C, DO-160F, DO-178B Level B, DO-254
Level C, DO-260B, DO-181D
idle: 0.15 A active: 0.28 A
130 W at connector
for the transponder -40°C to +70°C
for the controller -25°C to +70°C
no fan required
440g / 0.8 lbs
90g / 0.11 lbs
controller: H 44 x W 63 x L 54 mm
transponder in tray: H 48 x W 68 x L 160 mm
controller: H 1.8 x W 2.4 x L 2.1 inches
transponder in tray: H 1.8 x W 2.6 x L 6.2 inches
© Bournemouth Avionics 2022
Website by Eldo™